Cisco Aironet AIR-CAP1602E-A-K9 시작하기 매뉴얼 - 페이지 2

{카테고리_이름} Cisco Aironet AIR-CAP1602E-A-K9에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet AIR-CAP1602E-A-K9 39 페이지. Aironet 1600 series access point

Cisco Aironet AIR-CAP1602E-A-K9 시작하기 매뉴얼
1

About this Guide

This Guide provides instructions on how to install and configure your Cisco Aironet 1600 Series
Access Point. The 1600 Series Access Point is referred to as the 1600 series or the access point in this
document.
2

Introduction to the Access Point

The 1600 series offers dual-band radios (2.4 GHz and 5 GHz) with integrated and external antenna
options. The access points support full inter-operability with leading 802.11n clients, and support a
mixed deployment with other access points and controllers.
The 1600 series access point is available in controller-based mode and supports:
• Simultaneous single-band or dual-band (2.4 GHz/5 GHz) radios
• Integrated antennas on 1602I access point models (AIR-CAP1602I-x-K9)
• External antennas on 1602E access point models (AIR-CAP1602E-x-K9)
Note
The 'x' in the model numbers represents the regulatory domain. Refer to
Domains" section on page 6
The features of the 1600 series are:
• Processing sub-systems (including CPUs and memory) and radio hardware which supports:
Network management
ClientLink 2.0—BeamForming to 802.11n clients as well as legacy 802.11a/g OFDM clients
VideoStream
Location
WIDS/WIPS
Security
Radio Resource Management (RRM)
Rogue detection
Management Frame Protection (MFP)
• 32 MB flash size
• 802.11af/at
CDP (Cisco Discovery Protocol)
2
for a list of supported regulatory domains.
"Regulatory