ACU-RITE 00899 사용 설명서 - 페이지 9

{카테고리_이름} ACU-RITE 00899에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 00899 16 페이지. Rain gauge
ACU-RITE 00899에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

time and date for TOTAL A or TOTAL B, press the HIST button. To clear

TOTAL A or TOTAL B mode, press AND HOLD the CLEAR button while the

mode is being viewed.

Alarms

Flood Watch Alarm

Press the FLOOD WATCH button to activate or deactivate the FLOOD WATCH

ALARM. When the alarm is ON and flood and saturation conditions are

present, an alarm will sound and the FLOOD WATCH indicator will highlight

on the display. Flood conditions include:

> 3" (76.2 mm) in the last 7 days, and then >0.7" (17.78 mm) in the last 2 hours or

>1" (25.4 mm) in the last 24 hours

> 2.3" (58.4 mm) in the last 4 days, and then >0.7" (17.78 mm) in the last 2 hours or

>1" (25.4 mm) in the last 24 hours

> 1.5" (38.1 mm) in the last 2 days, and then >0.7" (17.78 mm) in the last 2 hours or

>1" (25.4 mm) in the last 24 hours

> 1.4" (35.6 mm) in the last 2 hours

> 1.6" (40.6 mm) in the last 8 hours

> 1.8" (45.7 mm) in the last 24 hours

If flood or saturation conditions occur, the alarm sounds for 1 minute or until

any button is pressed. If no buttons are pressed, the FLOOD WATCH indicator

will flash on the display, and the alarm will sound three times on the hour for

the next 8 hours.

NOTE: The rain gauge measures rainfall even while the flood alarm is off.

Rain Alarm

Press the RAIN ALARM button to activate or deactivate the RAIN ALARM.

When the alarm is ON and any rainfall is detected an alarm will sound and

the RAIN ALARM indicator will highlight on the display. The alarm sounds for

1 minute or until any button is pressed. If no buttons are pressed, the alarm will

stop and the RAIN ALARM icon will flash for up to 30 minutes.

NOTE: The FLOOD WATCH ALARM and RAIN ALARM are NOT intended to

be a safety device or warning system.