ACU-RITE 00899 사용 설명서 - 페이지 7

{카테고리_이름} ACU-RITE 00899에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 00899 16 페이지. Rain gauge
ACU-RITE 00899에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

Set the Time, Date & Units

This rain gauge is equipped with historical data and alarms that require accurate

time and date settings to function properly. It is important to set the time, date and

units before using the rain gauge.

Press and hold the "SET" button for 3 seconds to enter SET MODE. Once in set

mode, the preference you are currently setting will blink on the display.

To adjust the currently selected (flashing) item, press and release the "+" or "-"

button (press and HOLD to fast adjust).

To save your adjustments, press and release the "SET" button again to adjust the

next preference. The preference set order is as follows:

CLOCK HOUR (note AM/PM indicators)

CLOCK MINUTE

CALENDAR MONTH

CALENDAR DATE

CALENDAR YEAR

UNITS (INCH or MM)

You will automatically exit SET MODE if no buttons are pressed for 20 seconds. Enter

SET MODE at any time by pressing and holding the "SET" button for 3 seconds.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper

placement of both the display and rain gauge are critical to the accuracy and

performance of this product.

Display Placement

Place the display in a dry area free of dirt and dust.

Display stands upright for tabletop use or is wall-mountable.

Important Placement Guidelines

• Display and rain gauge must be within 100 ft (30 m) of each other.

• To maximize wireless range and communication, install the rain gauge at

least 3 ft (.9 m) above ground. Place both the display and the rain gauge

away from large metallic items, thick walls, metal surfaces, or other objects

that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (0.9 m) away

from electronic devices (TV, computer, microwave, radio, etc.)

LEAST

APART

100 feet maximum

(30 meters)