ARGENTO ELEPHANT 사용자 설명서 - 페이지 10

{카테고리_이름} ARGENTO ELEPHANT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARGENTO ELEPHANT 20 페이지. Epac bicycle electrical pedal-assisted cycle

5. COMMISSIONING

Before using the bicycle for the first time, it is necessary to charge the battery for at

least 4-6 hours, until charging is complete, using the battery charger supplied.

The average charging time is around 4-6 hours.

The batteries are of the lithium type 36V.

To extend the life of the battery as much as possible, a full charge every thirty days

is recommended even if the bicycle is not used.

We recommend charging the battery with its special battery charger after

each use of the pedal-assisted bicycle.

Charging with battery inserted:

Insert the charger plug into the appropriate socket on the battery;

Connect the battery charger to the mains socket (230V / 50Hz).

Charging with battery removed:

Insert the key in the lock located on the battery cover.

Turn the key unticlockwise and remove the battery from the frame and place it on a

flat surface, follow the precautions indicated with regard to charging procedures,

insert the battery charger plug into the socket on the battery and then connect the

charger to the mains socket (230V / 50Hz).

The red light in the battery charger is on during charging, the red light turns

green when charging is complete.

The rear light is already installed under the seat. Remove the transparent label on

the rear light before the first use. Turn the light on / off using the appropriate button

on the light.