ARGENTO ELEPHANT 사용자 설명서 - 페이지 16
{카테고리_이름} ARGENTO ELEPHANT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARGENTO ELEPHANT 20 페이지. Epac bicycle electrical pedal-assisted cycle
8.5 Lighting management
Press and hold the + button for at least 1 second to switch the front light on the
pedal-assisted bicycle on / off.
Check that the reflectors are present and well tightened in the front and rear wheel.
8.6 Assisted walking
Keep the button pressed for at least 2 seconds - to activate the walking assist
function, the same function is interrupted when the button is released -
The assisted walking function allows the bike to activate the motor without the need
to pedal, this function allows the bike to reach a maximum speed of 6 km/h.
Never use the walk assist function while riding, as the electric parts of the
bike could be damaged.
Always use the walk assist function while walking alongside your electric
bike, firmly holding the handlebar grips with both hands.
8.7 Battery indicator
The battery indicator is complete upon completion of charging the battery of your
pedal assisted bicycle. The battery indicator drops in level as the pedal-assisted
bicycle is used. The battery indicator can fluctuate in the charge level depending on
the use of the pedal-assisted bicycle, for example if you go uphill the level of the
battery indicator can drop rapidly as it has a much higher battery consumption
supplied on your pedal-assisted bicycle.
For a good use and maintenance of the battery it is recommended to fully charge
the battery after each use of your electric bike.
9. LCD CONFIGURATION
Press the M button for at least 2 seconds to enter the LCD display configuration.
Within the display configuration, press the + and - buttons to change the value of
the single parameter, press the M button to move to the next parameter, press the
M button for at least 2 seconds to exit the LCD display configuration.
9.1 Km / Miles
Indicated by the S7 symbol, press the + and - buttons to switch from a Km / h to
MPH display.
9.2 Display backlight
Indicated by the symbol b1, allowed values: 1-5.
Assisted walking
1
6
1
6