Epson 4000 - Stylus Pro Color Inkjet Printer 여기에서 시작하기 매뉴얼 - 페이지 2

{카테고리_이름} Epson 4000 - Stylus Pro Color Inkjet Printer에 대한 여기에서 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 4000 - Stylus Pro Color Inkjet Printer 6 페이지. Print engine
Epson 4000 - Stylus Pro Color Inkjet Printer에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 제품 참조 매뉴얼 (38 페이지), 제품 정보 (13 페이지), 제품 지원 게시판 (17 페이지), 중요 정보 (2 페이지), 제한 보증 (12 페이지), 빠른 참조 매뉴얼 (11 페이지), 브로셔 및 사양 (12 페이지), 브로셔 및 사양 (6 페이지), 설정 매뉴얼 (16 페이지)

Install Ink

Use the ink cartridges that came with your printer for initial ink charging. During the initial

installation process, it is normal for up to one-third of the ink in each cartridge to be used.

Press the

Press both ink compartment covers to open them.

Raise both ink levers.

Remove each ink cartridge from its package and

gently shake the cartridge.

Install the ink cartridges in the printer. Hold

each cartridge with the arrow pointing toward

the printer, then insert it into its slot. Make sure

you insert each cartridge in the correct slot.

After installing all 8 cartridges, lower the ink levers.

The printer begins charging the ink delivery system

and the

Pause light flashes.

After approximately 2 minutes, ink lever messages

appear on the LCD. follow the instruction to raise

or lower the ink levers.

Caution:

Charging takes about 8 minutes. Never turn off the printer,

release the paper lever, or open the cover while the

or you may damage the printer.

When READY appears on the LCD display, charging is complete. Close the ink

compartment covers.

Caution:

Always turn off the printer using the

the LCD display turns off. This ensures that the print head is safely capped.

Power button to turn on the printer.

Pause light is flashing,

Power button. Then wait until

Power button