ARGENTO Piuma 사용자 설명서 - 페이지 12

{카테고리_이름} ARGENTO Piuma에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARGENTO Piuma 20 페이지. Electric pedal-assisted cycle

6. ASSEMBLY

1. Carefully remove the bike from the packaging,

then remove all the protective material, being

careful not to scratch the painted parts and not to

pull the bike cables. The removal of the bike from

the packaging must be carried out by two adults, in

order not to incur injuries or crushing.

2. Open the frame, then close the handle on the

frame indicated by the number 1 on the right

picture, then close the handle on the frame

indicated by the number 2 on the right picture.

3. Open the handlebar stem in its correct vertical

position, being careful when tightening the

handlebar stem through its own locking device.

4. Insert the seat post into the bike, making sure to

orient the seat and tighten the seat post correctly

with the appropriate device on the frame as shown

in the photo on the right. Do not raise the seat

post beyond the limit of 15 cm to avoid breaking

the frame and serious injuries while riding.

5. Identify the right pedal through the R mark placed

on the pedal axis, while the L mark identifies the left

pedal.

Tighten the left pedal anticlockwise and the right

pedal clockwise, in their respective positions to

avoid serious injuries while using the bike and

damaging the bike.

MAKE SURE ALL BOLTS AND PEDALS ARE

TIGHT