Cisco AP1030 빠른 시작 매뉴얼 - 페이지 13
{카테고리_이름} Cisco AP1030에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AP1030 44 페이지. Aironet 1000 series ieee 802.11a/b/g lightweight access points with external antennas
페이지 인쇄Installation and Configuration
such as metal HVAC ducts, conduit, pipes, bookcases, elevator shafts, stairwells, and metal walls.
REFER TO THE Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Point
Deployment Guide BEFORE MOUNTING Cisco Aironet 1000 Series Lightweight Access Points
NEAR METAL OBSTRUCTIONS.
Figure 2
•
WHEN MOUNTING Cisco Aironet 1000 Series Lightweight Access Points IN THE CORNER OF
A RIGHT-ANGLE HALLWAY INTERSECTION, MOUNT THE Cisco Aironet 1000 Series
Lightweight Access Point AT A 45-DEGREE ANGLE TO THE TWO HALLWAYS. The Cisco
Aironet 1000 Series lightweight access point internal antennas are not omnidirectional and cover a
larger area when mounted this way.
Figure 3
When a Cisco Aironet 1000 Series lightweight access point is configured with an IP address and is
moved to a different IP segment, it attempts to join a Cisco Wireless LAN Controller. If it is unable to
join a Cisco Wireless LAN Controller after a number of attempts, it does an arp for the default configured
gateway. If the Cisco Aironet 1000 Series lightweight access point is on the wrong subnet, it will not be
able to resolve the gateway arp and it will attempt to contact a DHCP server. This is the Cisco Aironet
1000 Series lightweight access point IP address fallback feature. However, if the destination IP segment
does not have a DHCP server, the Cisco Aironet 1000 Series lightweight access point retains its original
IP address and can never join the network.
AP1020/1030 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with External Antennas - Quick Start Guide
78-17147-01
Access Point Clearance
Mounting the Access Point in the Correct Direction
1 meter (3 ft.)
clearance
3