Cisco ASA 5508-X 하드웨어 설치 매뉴얼 - 페이지 31

{카테고리_이름} Cisco ASA 5508-X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5508-X 32 페이지. Threat defense reimage guide
Cisco ASA 5508-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 간편한 설정 매뉴얼 (11 페이지), 빠른 시작 매뉴얼 (9 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (6 페이지), 매뉴얼 (14 페이지)

Maintenance and Upgrades

This chapter contains procedure for maintaining and upgrading the ASA, and contains the following sections:

•

As mentioned in

SSD should it fail; you do not need to power off the ASA to do so.

Follow these steps to replace a failed SSD in an ASA:

Step 1

Loosen the thumb screws on both sides of the SSD bay and pull the existing SSD out of the bay.

Step 2

Insert the new SSD into the bay and push it in until it is seated.

Step 3

Tighten the thumb screws on both sides of the SSD bay.

Step 4

Check the SSD LED to make sure the SSD is seated properly and functioning. See

of the SSD LED.

Online Only

Replace the SSD , page 27

Solid State Drive, on page

C H A P T E R

7, the ASA ships with an SSD installed. You can replace this

Cisco ASA 5508-X and ASA 5516-X Hardware Installation Guide

LEDs, on page 4

for a description