Cisco ASA 5516-X 빠른 시작 매뉴얼

{카테고리_이름} Cisco ASA 5516-X에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5516-X 9 페이지. Threat defense reimage guide
Cisco ASA 5516-X에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (32 페이지), 빠른 시작 매뉴얼 (8 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (6 페이지), 매뉴얼 (14 페이지)

Cisco Firepower Threat Defense for the

ASA 5508-X and ASA 5516-X Using

Firepower Management Center Quick Start

Guide

First Published:

Last Updated:

December 3, 2018

Warning:

You cannot install Firepower Threat Defense 6.3 or subsequent releases on the ASA 5508-X and

5516-X. The final supported Firepower Threat Defense release for these platforms is 6.2.3.

1. Is This Guide for You?

This guide explains how to complete the initial configuration of your Firepower Threat Defense device and how to

managed devices are installed on network segments, monitor traffic for analysis, and report to a managing

Firepower Management Center. The Firepower Management Center provides a centralized management console

with web interface that you can use to perform administrative, management, analysis, and reporting tasks.

For networks that include only a single device or just a few, where you do not need to use a high-powered

multiple-device manager like the Firepower Management Center, you can use the integrated Firepower Device

Manager. Use the Firepower Device Manager web-based device setup wizard to configure the basic features of

the software that are most commonly used for small network deployments as described in

http://www.cisco.com/go/fdm-quick.

2. Package Contents

This section lists the package contents of the chassis. Note that contents are subject to change, and your exact

contents might contain additional or fewer items.

August 10, 2016

Cisco Systems, Inc.