Cisco Catalyst 9117AX Series 시작하기 매뉴얼 - 페이지 12

{카테고리_이름} Cisco Catalyst 9117AX Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 9117AX Series 36 페이지.

Cisco Catalyst 9117AX Series Access Points

Preparing the AP for Installation

Before you mount and deploy your access point, we recommend that you perform a site survey (or use the site planning

tool) to determine the best location to install your access point.

You should have the following information about your wireless network available:



Access point locations.



Access point mounting options: below a suspended ceiling, on a flat horizontal surface, or on a desktop.

You can mount the access point above a suspended ceiling but you must purchase additional mounting

Note

hardware: See



Access point power options: PoE+ or Cisco Power Injector AIR-PWRINJ5= or AIR-PWRINJ6=.

If AIR-PWRINJ5= is used, the AP will work with reduced features.

Note

Cisco recommends that you make a site map showing access point locations so that you can record the device MAC

addresses from each location and return them to the person who is planning or managing your wireless network.

"Mounting the Access Point" section on page 13

for additional information.