Epson Artisan 1430 여기에서 시작

{카테고리_이름} Epson Artisan 1430에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 1430 4 페이지. All-in-one printer epson artisan 1430
Epson Artisan 1430에 대해서도 마찬가지입니다: 중요 안전 지침 매뉴얼 (12 페이지), 범위 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (7 페이지)

페이지 인쇄
Epson Artisan 1430 여기에서 시작
Artisan
1430
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
1
Remove all protective materials.
2
Open the printer cover and remove any tape inside.
2
Turn on
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
2
Press the
power button
*412173500*
*412173500*
.
3

Install ink cartridges

1
Open the printer cover, then open the ink cartridge cover.
2
Unpack the ink cartridges.
3
Remove only the yellow tape from each cartridge.
Caution:
Don't remove any other seals or the cartridges
may leak.
4
Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
5
Close the ink cartridge cover, then close the
printer cover.
6
Press the
ink button to begin priming the ink. This
takes about 3 minutes. Do not turn off the printer, load
paper, or open any covers until the process is complete.
Note:
Your printer ships with full cartridges and part of the
ink from the first cartridges is used for priming the printer.
Replacement cartridges will print more pages.
Caution:
Don't turn off the printer while it is priming or you'll
waste ink.