Caberg Jackal 매뉴얼 - 페이지 6

{카테고리_이름} Caberg Jackal에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Caberg Jackal 16 페이지.

ENG

1. HOW TO REMOVE THE CLEAR VISOR

1.1 Open completely the visor.

1.2 Press the cursor A then release the hook B (visor inner side) in or-

der to remove the visor (Pic.1).

1.3 Repeat the operation on the other side

2. HOW TO INSTALL THE CLEAR VISOR

2.1 Place the visor in open position and then insert the hook B (visor

inner side)

2.2 Press the rotation pivot C until complete fastening

2.3 Repeat the operation on the other side

3. HOW REMOVE THE SMOKE VISOR.

3.1

Drive rearward the smoked visor lever D to remove the smoked

visor (Pic.2)

3.2 Release the smoked visor by pulling slightly outward (Pic.3)

4. HOW TO INSTALL THE SMOKE VISOR

4.1 Drive rearward the smoke visor lever

4.2 Clip the smoke visor accommodating its side parts into their seating

slightly pressing (Pic.4)

WARNINGS! Do not use the smoke visor during late night hours or in

scarce visibility condition.

WARNINGS! Any adjustments to the smoke visor must be done in still

position.

5. HOW TO REMOVE THE WASHABLE LINING.

To remove the inner padding you can start either from the right or left

side.

5.1 Remove the cheek pad by pulling it inwards and detach the studs in

the back. Repeat the same step on the opposite side (Pic.5).

5.2 Starting from the neck device, remove the lining by pulling slightly

towards the inside of the helmet (Pic.6) until release the fixing plas-

tic frame in the rear E. Still pulling gently, release also the fixing

plastic frame in the front F (Pic.7).

5.3 Remove completely the lining.