Cisco Catalyst IW6300H-DC 설치 매뉴얼 - 페이지 13

{카테고리_이름} Cisco Catalyst IW6300H-DC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst IW6300H-DC 28 페이지.

Installing the Access Point

Figure 12: Assembled Access Point Hanging in Mounting Bracket

Step 14

When using the Cisco Aironet Dual-Band Omnidirectional Antennas, connect them to the access point.

Hand-tighten the antennas to the access point.

Step 15

Continue with

Working with the Access Cover

This section details opening and closing the access cover of the access point.

Opening the Access Cover

Caution

The access cover must not be opened unless the area is considered non-hazardous and the AP has been powered

off.

You need to open the access cover to access the AC or DC terminal block, the Ethernet ports, and when you

are installing the fiber-optic SFP module.

Access point

Mount bracket

Grounding the Access Point , on page 19

Working with the Access Cover

Pole (wood, metal, or fiberglass)2 to 16 in.

(5.1 to 40.6 cm) diameter

Stainless steel mounting straps

and

Powering the Access Point, on page

Installing the Access Point

20.