Epson Artisan 800 - All-in-One Printer 네트워크 설치 매뉴얼 - 페이지 35

{카테고리_이름} Epson Artisan 800 - All-in-One Printer에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 800 - All-in-One Printer 41 페이지. Artisan 700/800 series
Epson Artisan 800 - All-in-One Printer에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 카트리지 교체 (2 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 제품 지원 게시판 (5 페이지), 네트워크 설치 매뉴얼 (29 페이지), 설정 정보 (3 페이지), 자주 묻는 질문 (4 페이지)

■

Reset the printer's network settings (see page 37) and perform a first-time

installation of the printer software. (See page 3 for wireless installations or

page 15 for wired installations.)

Printing is slow or the print is cut off

Print a Network Status Sheet (see page 36) and check the Signal Condition. If it's

poor, try moving the printer closer to your wireless router or access point. Avoid

placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large

metal objects such as a filing cabinet.

A dial-up connection dialog box appears when printing with EpsonNet

If you use a dial-up connection for Internet access, you will see this message every

time you print. Try connecting to the Internet using a LAN connection or set your

dial-up connection to dial manually (Never dial a connection).

Scanning Problems

Cannot find the scanner or start Epson Scan

■

If you're using Mac OS X, make sure that you configured the Epson Scan

network settings (see page 29).

■

If network communication was interrupted while starting Epson Scan, exit

Epson Scan, and restart it after a few seconds. If Epson Scan cannot restart,

turn the printer off and back on, and then try restarting Epson Scan. Check

the

Timeout Setting

Scan Help.

■

If you have a firewall or Internet security software installed, the search feature

EPSON Scan Settings

Network Status Sheet (see page 36), click

Enter address

■

If you are scanning a large document at high resolution, a communication

error may occur. If the scan did not complete, lower the resolution.

EPSON Scan Settings

may not work correctly. In this case, print a

, and enter the IP address manually.

. For details, see the Epson

EPSON Scan Settings

Troubleshooting

Add