Cisco Cisco Aironet Wireless LAN Client 시작하기 매뉴얼 - 페이지 10
{카테고리_이름} Cisco Cisco Aironet Wireless LAN Client에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Aironet Wireless LAN Client 38 페이지.
Cisco Cisco Aironet Wireless LAN Client에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)
페이지 인쇄
6
Preparing the AP for Installation
Before you mount and deploy your access point, we recommend that you perform a site survey (or use
the site planning tool) to determine the best location to install your access point.
You should have the following information about your wireless network available:
• Access point locations.
• Access point mounting options: on a wall or a ceiling only.
You can mount the access point above a suspended ceiling but you must purchase
Note
additional mounting hardware: See
additional information.
• Powered by 802.3af, through PoE from a network device or a PoE power injector or hub (usually
located in a wiring closet).
Access points mounted in a building's environmental airspace must be powered using PoE
Note
to comply with safety regulations.
Cisco recommends that you make a site map showing access point locations so that you can record the
device MAC addresses from each location and return them to the person who is planning or managing
your wireless network.
7
Installation Overview
Installing the access point involves these operations:
Performing a Pre-Installation Configuration, page 11
Step 1
Mounting the Access Point, page 14
Step 2
Powering the Access Point, page 14
Step 3
Configuring and Deploying the Access Point, page 15
Step 4
10
"Mounting the Access Point" section on page 14
(optional)
for