ACU-RITE 02030RM 사용 설명서 - 페이지 12

{카테고리_이름} ACU-RITE 02030RM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 02030RM 16 페이지.

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep

away from dust, dirt and moisture. Clean ventilation ports regularly with a

gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Calibrate Temperature & Humidity

The indoor / outdoor temperature and humidity readings can be calibrated on

the display unit to improve accuracy. Calibration can improve accuracy when

sensor placement or environmental factors impact your data accuracy.

1. To access calibration mode, press AND HOLD the "▲", "Set", and "▼"

buttons (located on the back of the display unit) for at least 5 seconds.

2. Once in calibration mode, the preference you are currently setting will blink

on the display.

3. Press the "▲" or "▼" buttons to calibrate the data value higher or lower

from the actual reading.

4. Press the "Set" button to confirm the calibration adjustment.

The "

" icon will remain illuminated next to calibrated values.

5. The next adjustable data will begin flashing, indicating it is ready to be

calibrated. Repeat Steps 1 - 4 to calibrate additional data.

After 20 seconds of inactivity, the display will save the adjustments and exit

calibration mode. Note: Calibrations will be erased if the display is reset or if

batteries are removed and the power adapter is unplugged.

Calibrate Barometric Pressure

The weather station default pressure mode is "AUTO". In auto mode, the

pressure will calibrate itself over a 14 day Learning Mode. Barometric pressure

can be manually calibrated:

1. Press AND HOLD the "Set" button (located on the back of the display unit)

for at least 10 seconds to enter manual pressure mode.

2. The un-calibrated pressure will be displayed. Press AND HOLD the "▲",

"▼", and "Set" buttons for at least 5 seconds.