Epson Artisan 837 빠른 매뉴얼 - 페이지 24

{카테고리_이름} Epson Artisan 837에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 837 44 페이지. Color inkjet printer
Epson Artisan 837에 대해서도 마찬가지입니다: 시작 매뉴얼 (4 페이지), 여기에서 시작 (4 페이지), 사양 (2 페이지), 여기에서 시작 (4 페이지), 여기에서 시작 (2 페이지), 자주 묻는 질문 (4 페이지), 서비스 매뉴얼 (20 페이지)

Cleaning the Print Head

If print quality has declined and the nozzle check indicates clogged nozzles, you can clean

the print head. Print head cleaning uses ink, so clean it only if necessary.

Note: You cannot clean the print head if an ink cartridge is expended, and may not be

able to clean it when a cartridge is low. You must replace the cartridge first (see

page 26).

Load letter- or A4-size plain paper in the main paper cassette.

Press

Select

Maintenance

Press x

Start

Cleaning takes about 2 minutes. When it's finished, you see a message on the display

screen.

Caution: Never turn off the printer during head cleaning or you may damage it.

Select

Nozzle Check

print head is clean.

If there are still gaps or lines, or the test patterns are faint, run another cleaning cycle

and check the nozzles again.

Note: If you don't see any improvement after cleaning the print head four times, turn

off the printer and wait at least six hours to let any dried ink soften. Then try cleaning

the print head again. If quality does not improve, one of the ink cartridges may need to

be replaced. If that doesn't help, contact Epson as described on page 35.

If you do not use your product often, it is a good idea to print a few pages at least once

a month to maintain good print quality.

Maintaining Your Product

, if necessary, then press l or r and select

Home

, then

Head Cleaning

, then press x

to run a nozzle check and confirm that the

Start

Setup