Argo A1/SWAN 사용 설명서 - 페이지 11
{카테고리_이름} Argo A1/SWAN에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo A1/SWAN 13 페이지.
페이지 인쇄
FOR OPTIMAL REMOTE CONTROL OPERATION, POINT THE TRANSMITTER HEAD TOWARDS THE
RECEIVER ON THE AIR CONDITIONER.
(1) ON/OFF BUTTON
Press this button to switch the unit on or off.
(2) TIMER BUTTON
a. When the air conditioner is off, press "TIMER" to set when to switch the unit on. Press "+" o "–" to set the time, and press
"TIMER" again to confirm.
b. When the air conditioner is on, press "TIMER" to set when to switch the unit off. Press "+" o "–" to set the time, and press
"TIMER" again to confirm.
c. After setting the time, press "TIMER" to cancel the time setting.
(3) DOWN BUTTON
Press this button to adjust the temperature and set the time.
(4) MODE BUTTON
When the unit is on, press this button to choose the desired mode among: COOLING, FAN and DEHUMIDIFYING.
(5) UP BUTTON
Press this button to adjust the temperature and set the time.
(6) FAN BUTTON
In the cooling and fan modes, press this button to adjust the ventilation speed to low (Low) or high (High). In certain
conditions, the fan speed may not function according to the settings.
In dehumidifying mode, this button cannot be pressed, thus the fan will forcefully choose the low fan speed.
V 12/16
1.
ON/OFF BUTTON
2.
TIMER BUTTON
3.
DOWN BUTTON
4.
MODE BUTTON
5.
UP BUTTON
6.
FAN BUTTON
7.
SLEEP BUTTON
24