Epson C11CA29201-O - Artisan 800 Color Inkjet 네트워크 설치 매뉴얼 - 페이지 23
{카테고리_이름} Epson C11CA29201-O - Artisan 800 Color Inkjet에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11CA29201-O - Artisan 800 Color Inkjet 29 페이지. Artisan 700/800 series
Epson C11CA29201-O - Artisan 800 Color Inkjet에 대해서도 마찬가지입니다: 네트워크 설치 매뉴얼 (41 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 제품 지원 게시판 (5 페이지), 설정 정보 (3 페이지)
페이지 인쇄
The printer does not appear in the Add Printer window (Mac OS X)
Make sure the printer driver was installed correctly and that your computer's
TCP/IP settings are configured correctly.
Printing Problems
Cannot print over the network
■
Print a Network Status Sheet (see page 25) and verify that the network
settings are correct.
■
When using TCP/IP, make sure the printer's IP address is set correctly for your
network. If your network does not assign IP addresses using DHCP, you will
need to set the IP address manually.
■
Print a Network Status Sheet (see page 25). If the Link Status says Disconnect,
make sure that the wireless router or access point is turned on and that the
settings are correct for your wireless network.
■
Reset the printer's network settings (see page 26) and perform a first-time
installation of the printer and software (see page 3).
Printing is slow or the print is cut off
Print a Network Status Sheet (see page 25) and check the Signal Condition. If it's
poor, try moving the printer closer to your wireless router or access point. Avoid
placing the printer next to a microwave oven, 2.4 GHz cordless phone, or large
metal object such as a filing cabinet.
A dial-up connection dialog box appears when printing with EpsonNet
Print
If you use a dial-up connection for Internet access, you will see this message every
time you print. Try connecting to the Internet using a LAN connection or set your
dial-up connection to dial manually (Never dial a connection).
Troubleshooting
23