Cisco M10-RM 빠른 참조 매뉴얼 - 페이지 6

{카테고리_이름} Cisco M10-RM에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco M10-RM 13 페이지. Cisco valet plus: reference guide

Update or create an Easy Setup Key

1. Insert the Easy Setup Key or your own USB flash drive

into an available USB port on your computer. Wait

while the files are copied to the Easy Setup Key.

Update or Create an Easy Setup Key

2. Remove the Easy Setup Key and click Close. You can

now use it to connect other computers to the Valet.

Refer to Connect with the Easy Setup Key, page 4

to complete the process of adding another computer.

Easy Setup Key Has Been Updated

Connect without the Easy Setup Key

1. Enter the Network name (SSID), Security Key, and

Security Type settings on your wireless device. To print

this information, click Print these settings.

Wireless Network Settings

2. After connecting your device, click Next.

3. Enter a name that will be used to identify this device.

Then click Finish.

Name Your Device

Wireless printer

1. Refer to your printer's documentation to learn how to

connect it to a wireless network.

2. Enter the Network name (SSID), Security Key, and

Security Type settings on your wireless device. To print

this information, click Print these settings.

Wireless Network Settings

3. Wait until your printer connects. On the Connecting a

wireless printer screen, click Next.

4. Enter a name that will be used to easily identify your

printer.

Name Your Printer

Cisco Connect