Epson C11CA30201 - Artisan 700 Photo All-in-One Printer 기능 설명서 - 페이지 3
{카테고리_이름} Epson C11CA30201 - Artisan 700 Photo All-in-One Printer에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11CA30201 - Artisan 700 Photo All-in-One Printer 28 페이지. Using the control panel for wireless network installation
Epson C11CA30201 - Artisan 700 Photo All-in-One Printer에 대해서도 마찬가지입니다: 네트워크 설치 매뉴얼 (41 페이지), 중요한 설정 정보 (3 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 제품 지원 게시판 (5 페이지)
페이지 인쇄
Connecting to Your Wireless Network
To add the printer to your wireless network, you need to know the name (SSID)
of your wireless network. If it has security enabled, you also need to know the
security mode and WEP key or WPA passphrase. Enter your network and security
information in the space provided below:
Network name (SSID): ____________________________________________
Security mode (select one):
❑
None
❑
WEP-64, ASCII
❑
WEP-64, Hexadecimal
❑
WEP-128, ASCII
❑
WEP-128, Hexadecimal
❑
WPA-PSK (TKIP)
❑
WPA-PSK (AES)
WEP key or WPA passphrase: _______________________________________
Note:
The printer supports the following wireless security modes: WEP-64, WEP-128, and
WPA-PSK.
If your WEP key is 5 or 13 characters, it's ASCII. If it's 10 or 26 characters, it's
hexadecimal.
If your WPA passphrase contains upper- or lowercase letters, be sure to note them
correctly.
If your wireless network uses WPA as the security mode, you will also need to know
whether it's using TKIP or AES as the encryption algorithm.
If you don't know your wireless network name (SSID) or security settings, contact the
person who set up your wireless network.
Connecting to Your Wireless Network
3