Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer 네트워크 설치 매뉴얼 - 페이지 19
{카테고리_이름} Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer 37 페이지. Product brochure
Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 기능 및 이점 (2 페이지)
페이지 인쇄
10. Press
to select the default channel for your Ad Hoc network.
OK
11. Continue with the next section.
Choose Security Settings
1. Press u or d to select the security mode you want to use for the Ad Hoc
wireless network, then press
Note:
If you don't want to enable security for your Ad Hoc network, select None, then
press OK.
2. Do one of the following:
■
If you selected
Settings and Connect to the Network" on page 21.
■
If you selected WEP as the security mode, continue with step 3.
3. Create a WEP key for the Ad Hoc network. The WEP key can be in
alphanumeric (ASCII) format (recommended) or hexadecimal format.
Note:
An alphanumeric WEP key must be 5 or 13 characters. A hexadecimal WEP key
must be 10 or 25 characters.
4. Press u or d to select
Hexadecimal
.
OK
as the security mode, continue with "Confirm Your
None
Alphanumeric
if your WEP key is in hexadecimal format.
if your WEP key is ASCII, or select
Wireless Network Installation
19