Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer 네트워크 설치 매뉴얼 - 페이지 7
{카테고리_이름} Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer 37 페이지. Product brochure
Epson C11CA48201 - Stylus NX510 Wireless Color Inkjet All-in-One Printer에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 기능 및 이점 (2 페이지)
페이지 인쇄
9. When you see a screen like this one, verify that the settings are correct. If you
need to change a setting, press
change.
10. Once you have verified that your network settings are correct, press
the settings and return to the Network Settings menu.
11. Press the
Copy
r
12. Wait for the printer to connect to your wireless network (this can take up to
90 seconds).
Once it's connected, you see a green
13. Continue with "Install Software" on page 23.
Note:
If the printer doesn't connect to your wireless network after 90 seconds, the WEP key
or WPA passphrase may have been entered incorrectly. See "Connect Wirelessly Using
the Setup Wizard" on page 4 to select your network settings again.
If the printer still doesn't connect to your wireless network, see "The printer cannot
find or connect to the wireless router or access point" on page 31.
Back
y
button to exit the Network Settings Menu.
until you see the setting you need to
light on the printer's control panel.
WiFi
WiFi light
Wireless Network Installation
to save
OK
7