Cisco Meraki MR28 설치 매뉴얼 - 페이지 6

{카테고리_이름} Cisco Meraki MR28에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR28 12 페이지.

to http://my.meraki.com. Alternatively, browse to http://10.128.128.128.

4. Click on the "Uplink Conﬁguration" tab. Log in. The default login is the serial number (e.g. Qxxx-xxxx-

xxxx), with no password (e.g., Q2DD-551C-ZYW3).

5. Conﬁgure the static IP address, net mask, gateway IP address and DNS servers that this AP will use on

its wired connection.

6. If necessary, reconnect the AP to the LAN.

Static IP via DHCP Reservations

Instead of associating to each Meraki AP individually to conﬁgure static IP addresses, an administrator can

assign static IP addresses on the upstream DHCP server. Through "DHCP reservations," IP addresses are

"reserved" for the MAC addresses of the Meraki APs. Please consult the documentation for the DHCP server to

conﬁgure DHCP reservations.

Collect Tools

You will need the following tools to perform an installation:

Collect Additional Hardware for Installation

You will need the following hardware to perform an installation: