Cisco Meraki MR45 설치 매뉴얼 - 페이지 8

{카테고리_이름} Cisco Meraki MR45에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR45 15 페이지.
Cisco Meraki MR45에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

You will need the following hardware to perform an installation:

Installation Instructions

A good mounting location is important to getting the best performance out of your MR42E access point. Keep the

following in mind:

1. The antenna attached to the access point should have unobstructed line of sight to most coverage areas. For

example, if installing in an ofﬁce ﬁlled with workspaces divided by mid-height cubicle walls, installing on the ceiling

or high on a wall would be ideal.

2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).

3. If being used in a mesh deployment, the MR42E should have line of sight to at least two other Meraki devices. A

Cisco Partner can help ensure that your AP placement is ideal.

Install the MR42E

For most mounting scenarios, the MR42E mount cradle provides a quick, simple, and ﬂexible means of mounting your

device. The installation should be done in two steps. First, install the mount cradle to your selected location. Then,

attach the MR42E to the mount cradle.