Cisco Meraki MR46 설치 매뉴얼 - 페이지 10

{카테고리_이름} Cisco Meraki MR46에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR46 18 페이지.

3. If being used in a mesh deployment, the AP should have line of sight to at least two other Meraki devices. A Cisco

Partner can help ensure that your AP placement is ideal.

Install the AP

For most mounting scenarios, the access point mount cradle provides a quick, simple, and ﬂexible means of mounting

your device. The installation should be done in two steps. First, install the mount cradle to your selected location. Then,

attach the AP to the mount cradle.

The access point mount cradle can be used to install your access point in a wide range of scenarios: wall or solid ceiling,

below a drop ceiling, on various electrical junction boxes.

The mount cradle contains a variety of hole patterns that are customized for each installation scenario. The mounting

template (included inbox with mount cradle) should be used to drill holes for wall mounts and also to identify the correct

hole patterns in the mount cradle that should be used for each type of mount. The included mount cradle

template shows the hole patterns that should be used for each type of mount.

Wall or Solid Ceiling Mount Using Mount Cradle

Using included wall anchors and screws, attach the mount cradle to your mounting wall or ceiling. It is recommended

that the AP be mounted to a wall or solid ceiling using the mount cradle for physical security reasons.

Drop Ceiling Mount using Mount Cradle

To mount your AP on a drop ceiling T-rail, use the included drop ceiling mounting accessory kit. The accessory kit can

be used to mount to most 9/16", 15/16" or 1 ½" T-rails. The kit contains:

Drop ceiling mounting clips with set screws

6-32x4 mm screws