Cisco MERAKI MR46E-HW 하드웨어 설치 매뉴얼 - 페이지 24

{카테고리_이름} Cisco MERAKI MR46E-HW에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MERAKI MR46E-HW 28 페이지.

4.4 Verify Device Functionality and Test Network Coverage

Check LEDs

The LED should be solid white. If it is flashing orange, the firmware is automatically upgrading and the

LED should turn green when the upgrade is completed (normally in under thirty minutes).

Note: Your MR46E-HW must have an active route to the Internet to check and upgrade its firmware.

Verify access point connectivity

Use any 802.11 client device to connect to the MR46E-HW and verify proper connectivity using the

client's web browser.

Check network coverage

Confirm that you have good signal strength throughout your coverage area. You can use the signal

strength meter on a laptop, smart phone, or other wireless device.

Reference the Meraki knowledge base at

http://meraki.com/support/knowledge_base

for additional