Cisco Meraki MR52 하드웨어 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco Meraki MR52에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR52 25 페이지. Dual-band enterprise class 802.11ac wave 2 cloud-managed access point
Cisco Meraki MR52에 대해서도 마찬가지입니다: 설치 매뉴얼 (17 페이지)

페이지 인쇄
Cisco Meraki MR52 하드웨어 설치 매뉴얼

3.4 Assigning IP Addresses to MR52s

All gateway MR52s (MR52s with Ethernet connections to the LAN) must be assigned routable IP addresses.
These IP addresses can be dynamically assigned via DHCP or statically assigned.

3.4.1 Dynamic Assignment

When using DHCP, the DHCP server should be configured to assign a static IP address for each MAC address
belonging to a Meraki AP. Other features of the wireless network such as 802.1x authentication, may rely on the
property that the APs have static IP addresses.

3.4.2 Static Assignment

Static IPs are assigned using the local web server on each AP. The following procedure describes how to set
the static IP:
1. Using a client machine (e.g. a laptop), connect to the AP either wirelessly (by associating to any SSID
broadcast by the AP) or over a wired connection.
If using a wired connection, connect the client machine to the MR52 either through a PoE switch or a Meraki
PoE Injector. If using a PoE switch, plug an Ethernet cable into the MR52's Ethernet jack, and the other end
into a PoE switch. Then connect the client machine over Ethernet cable to the PoE switch. If using a Meraki
PoE Injector, connect the MR52 to the "PoE" port of the Injector, and the client machine to the "LAN" port.
2. Using a web browser on the client machine, access the AP's built-in web server by browsing to
http://my.meraki.com. Alternatively, browse to http://10.128.128.128.
3. Click on the "Static IP Configuration" tab. Log in. The default user name is "admin". The default password is
the AP's serial number, with hyphens included
4. Configure the static IP address, net mask, gateway IP address and DNS servers that this AP will use on its
wired connection.
5. If necessary, reconnect the AP to the LAN.
3.4.3 Static IP via DHCP Reservations
Instead of associating to each Meraki AP individually to configure static IP addresses, an administrator can assign
static IP addresses on the upstream DHCP server. Through "DHCP reservations", IP addresses are "reserved" for the
MAC addresses of the Meraki APs. Please consult the documentation for the DHCP server to configure DHCP
reservations.
9