Cisco Meraki MR55 설치 매뉴얼 - 페이지 11

{카테고리_이름} Cisco Meraki MR55에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR55 16 페이지.

The mount cradle contains a variety of hole patterns that are customized for each installation scenario. The mounting template (included inbox with mount

cradle) should be used to drill holes for wall mounts and also to identify the correct hole patterns in the mount cradle that should be used for each type of mount.

The included mount cradle template shows the hole patterns that should be used for each type of mount.

Wall or Solid Ceiling Mount Using Mount Cradle

Using included wall anchors and screws, attach the mount cradle to your mounting wall or ceiling. It is recommended that the MR55 be mounted to a

wall or solid ceiling using the mount cradle for physical security reasons.

Drop Ceiling Mount using Mount Cradle

To mount your MR55 on a drop ceiling T-rail, use the included drop ceiling mounting accessory kit. The accessory kit can be used to mount to most 9/

16", 15/16" or 1 ½" T-rails. The kit contains

• Drop ceiling mounting clips with set screws

• 6-32x4 mm screws

• 6-32x7 mm screws only used for recessed rail mount (uncommon)

• 2 rubber spacers which can be used for a recessed rail mount

1. Attach the T-rail clips to the T-rail by rotating them and snapping them into place as shown. The black foam

pads should be compressed slightly after installation.