Epson C11CA82211 빠른 매뉴얼 - 페이지 28

{카테고리_이름} Epson C11CA82211에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11CA82211 40 페이지. Freescale semiconductor all in one printer user manual

Error Indicators

You can often diagnose problems with your printer by checking the status of lights

on the control panel. If you see one of the error indicators below, follow the steps

here to proceed.

Light status

P power on

P power flashing (slow)

P power flashing (fast)

error on or flashing

ink flashing

ink on

Solving Problems

Problem and solution

The printer is turned on.

The printer is busy. Wait for the P power light to stop

flashing before turning off the printer.

The printer is being turned off.

Paper may be out. Load more paper in the sheet feeder

and press the y stop button to continue (see page 3).

If multiple sheets have fed into the sheet feeder, reload

the paper and press the y stop button to resume

printing.

Paper may have jammed in the sheet feeder. Open the

document cover and remove any paper jammed inside.

See your online User's Guide for more information.

An ink cartridge is expended or not installed correctly, or

is not compatible with the printer. Replace or reinstall the

ink cartridge (see page 23).

Ink in a cartridge is low. You can continue printing, or

check which cartridge is low and replace it (see page 23).

An ink cartridge is expended or not installed correctly, or

is not compatible with the printer. Replace or reinstall the

ink cartridge (see page 23).