Cisco Meraki MR70 설치 매뉴얼 - 페이지 12

{카테고리_이름} Cisco Meraki MR70에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR70 14 페이지. Cloud-managed access point
Cisco Meraki MR70에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지)

페이지 인쇄

Secure the MR70

Depending on your mounting environment, you may want to secure the MR70 to its mount location. If the MR70 has

been installed using the mount cradle, it should be secured via security screw included with mount cradle.

Security Screw

Install the security screw in the lower mount cradle tab.

Verify Device Functionality and Test Network Coverage

1. Check LEDs

a. The Power LED should be solid green (or blue, if clients are connected). If it is ﬂashing blue, the ﬁrmware is

automatically upgrading and the LED should turn green when the upgrade is completed (normally within a

few minutes). See the

b. Note: Your MR70 must have an active route to the Internet to check and upgrade its ﬁrmware.

2. Verify access point connectivity

a. Use any 802.11 client device to connect to the MR70 and verify proper connectivity using the client's web

browser.

3. Check network coverage

4. Conﬁrm that you have good signal strength throughout your coverage area. You can use the signal strength meter

on a laptop, smart phone, or other wireless device.

IP67 Rating

The MR70 is IP67 rated if Dow Corning DC 4 (or equivalent) is applied as shown below:

"LED

Indicators" section for more details. .