Cisco MERAKI MR72 하드웨어 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco MERAKI MR72에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MERAKI MR72 16 페이지.
Cisco MERAKI MR72에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

- Connection to the internet (if you are setting up your MR72 as a

gateway to the internet)

- Appropriately sized metal straps (if mounting to a pole larger than

3.9" in diameter)

- Specialized mounting hardware if mounting to surface other than

wood, stucco or stone

- Laptop with wireless to verify setup (recommended)

4 Installation Instructions

A good mounting location is important to getting the best performance

out of your MR72 access point. Keep the following in mind:

The device should have unobstructed line of sight to most

coverage areas. For example, if installing in an office filled with

workspaces divided by mid-height cubicle walls, installing on the

ceiling or high on a wall would be ideal.

Power over Ethernet supports a maximum cable length of 300 ft

(100 m).

If being used in a mesh deployment, the MR72 should have line

of sight to at least two other Meraki devices. For more detailed

instructions regarding access point location selection, reference

the Meraki Network Design Guide

(cisco.meraki.com/support/#documentation).

The antennas should be as unobstructed as possible. Make sure

that there is clearance around the MR72 for installation of all of

your chosen antennas.