Argo ADICS13DC 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} Argo ADICS13DC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo ADICS13DC 19 페이지. Split air conditioner system
Argo ADICS13DC에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

11 - REMOTE CONTROL UNIT INSTALLATION

To ensure that the air conditioner operates correctly, DO NOT install the remote control unit in the following places:

• In direct sunlight.

• Behind a curtain or other places where it is covered.

• More than 8 m away from the air conditioner.

• In the path of the air conditioner's airstream.

• Where it may become extremely hot or cold.

• Where it may be subject to electrical or magnetic noise.

• Where there is an obstacle between the remote control unit and the

air conditioner.

WALL-MOUNTED POSITION

• Momentarily place the remote control unit in the desired

mounting position.

• Verify that the remote control unit can operate from this

position.

• Fix the support at the wall with two screws and hang the

remote control unit.

12 - INFRARED RECEIVER INSTALLATION

Slot a screwdriver by the 2 slits on the cover sides,

and separate the cover from the base.

Do not lay the receiver cable near any power lines,

and do not put it into any raceways or metal tubes

together with other power lines. Install the receiver

far from electromagnetic interferences. Always

provide for an earth connection near the receiver

location, where possible.

Perform the earth connection with the terminal on

the base, as provided. Complete earth connection

and fasten the other end of the cable to the terminal

3 (COM) TP1 in the electric panel.

Do not power the system up, and do not start the

unit before having completed the refrigerant piping

and the electric installation.

If allowed by the local electric-power standards,

standard electric-component boxes can be used

for assembling the receiver.