Argo ADICS13DC 설치 지침 매뉴얼 - 페이지 14
{카테고리_이름} Argo ADICS13DC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo ADICS13DC 19 페이지. Split air conditioner system
Argo ADICS13DC에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (17 페이지)
페이지 인쇄EN
(2) ADDRESS SETTING THROUGH REMOTE CONTROLLER (UP TO 8 INDOOR UNITS)
C
At this point, press together FAN + IFEEL buttons for more than 7 seconds and release them pointing the remote controller
to the indoor unit receiver. Be sure to send the signal to only one indoor unit and that there is no other indoor unit that
could receive the same signal. If the signal is received, the indoor unit will emit 5 consecutive beeps.
NOTE: for electrical connections, refrigerant circuit connection and check, consult the Installation Instruction of outdoor
unit.
Set the remote controller as shown in the table.
BUTTON
working mode (COOL - HEAT)
set point
fl ap
fi lter
night mode / high mode
ifeel
Fan
14
Indoor unit A: 11°C
SETTING
Indoor unit B: 12°C
Indoor unit C: 13°C
AUTO
Indoor unit D: 14°C
Indoor unit E: 15°C
AUTO
Indoor unit F: 16°C
ON
Indoor unit G: 17°C
OFF
Indoor unit H: 18°C
Any
Any