Cisco Small Business AP541N 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} Cisco Small Business AP541N에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business AP541N 17 페이지. Small business pro series dual-band single-radio access point
Cisco Small Business AP541N에 대해서도 마찬가지입니다: 브로셔 (2 페이지), 빠른 시작 매뉴얼 (20 페이지)

페이지 인쇄

Returning the Cisco Small

Business AP541N to the

Factory Default Settings

To use the

Reset

following:

• To reboot the access point, press the

seconds.

• To restore the access point to the factory default settings:

1. Disconnect the access point from the network or disable all DHCP

servers on your network.

2. With the power on, press-and-hold the

10 seconds.

Installing the Cisco AP541N

The access point can be placed on a wall, a flat surface, or a ceiling. A

ceiling mount kit is available for this device (AP540N-CMK). Do not deploy

the device in a location where any of the following conditions exist:

High Ambient Temperature—The ambient temperature must not

exceed 104 degrees Fahrenheit (40C).

Reduced Air Flow—The air flow must be adequate to prevent

overheating.

Mechanical Overloading—The device should be level, stable, and

secure to avoid it sliding or shifting out of position.

Circuit Overloading—Adding the device to the power outlet or a PoE

port must not overload that circuit or PoE device.

We recommend using Cat5e or better cable. Also, do not

OTE

exceed the maximum cabling distance of 328 feet (100 meters).

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

button to reboot or reset the access point, do the

Reset

button for less than 10

Reset

button for more than