Epson CX4400 - Stylus Color Inkjet 제품 정보 - 페이지 9

{카테고리_이름} Epson CX4400 - Stylus Color Inkjet에 대한 제품 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX4400 - Stylus Color Inkjet 13 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson CX4400 - Stylus Color Inkjet에 대해서도 마찬가지입니다: 빠른 매뉴얼 (36 페이지), 사용자 설명서 (2 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 업데이트 (1 페이지), 여기에서 시작 (4 페이지)

Epson CX4400 - Stylus Color Inkjet 제품 정보
1. Make sure the CX4400 Series is on and the red B ink light is
on but not flashing.
2. Open the scanner and make sure its support locks in place.
Caution:
Do not touch any area shown below.
3. Press the y
button. The print head moves to the _
Stop
position to indicate which cartridge is low or expended.
Note:
Do not move the print head by hand; this may damage the
CX4400 Always press and release the
y
Stop button to move it.
5/07
Epson Stylus CX4400 Series
4. Press the y
button again.
Stop
❏ If another cartridge is low or expended, it moves to the
_ position. Press the y
more cartridges are low or expended.
❏ If no other cartridges are low or expended, the print
head moves to the replacement position.
5. Open the cartridge cover.
6. Squeeze the tab on the cartridge and lift it straight out.
Dispose of it carefully. Do not take the used cartridge apart
or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets into your eyes, flush them immediately with
water. Keep ink cartridges out of the reach of children.
button again to see if
Stop
9