Epson CX5400 - Stylus Color Inkjet 빠른 참조 매뉴얼 - 페이지 31

{카테고리_이름} Epson CX5400 - Stylus Color Inkjet에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX5400 - Stylus Color Inkjet 40 페이지. Product support bulletin(s)
Epson CX5400 - Stylus Color Inkjet에 대해서도 마찬가지입니다: 제품 정보 시트 (4 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 매뉴얼 (11 페이지), 소프트웨어 설치 (8 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 업데이트 (1 페이지), 제품 지원 게시판 (40 페이지), 제품 지원 게시판 (17 페이지), 제품 지원 게시판 (18 페이지)

Paper doesn't eject fully or is wrinkled.

If the paper doesn't eject fully, you may have selected the wrong paper size.

Press the x

Color Copy

button until you see

correct paper size, as described on page 11.

If it's wrinkled when it ejects, the paper may be damp or too thin. Load new

paper.

Copy Quality Problems

If you have any problems with the quality of your copies, try these solutions:

Make sure the document is placed flat against the document table glass. If only

part of the image is blurred, your document may be wrinkled or warped.

Make sure the Stylus CX is not tilted or placed on an unstable or uneven

surface.

Clean the print head; see page 23 for instructions.

If a dotted line appears in the image, clean the scanner glass with a soft, dry,

lint-free cloth (paper towels are not recommended). If the glass is still not

clean, use a small amount of glass cleaner on a soft cloth. Make sure you wipe

off any remaining liquid. Don't spray glass cleaner directly on the glass.

Make sure your paper isn't damp, curled, or loaded face down (the printable

side should be face up). Load new paper face up. Use EPSON papers for

proper saturation and absorption of genuine EPSON inks.

Use a support sheet with special paper or try loading your paper one sheet at

a time.

Align the print head; see page 25 for instructions.

The ink cartridges may be old or low on ink; see page 20 for instructions on

replacing an ink cartridge.

button to eject the paper, then press the right

on the LCD screen. Make sure you select the

Paper size