CABINETS TO GO Findley & Myers CBD36 조립 지침 - 페이지 3
{카테고리_이름} CABINETS TO GO Findley & Myers CBD36에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CABINETS TO GO Findley & Myers CBD36 4 페이지. Corner cabinets
CABINETS TO GO Findley & Myers CBD36에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (6 페이지)
페이지 인쇄Instructions:
►
1.
Place the face frame (A) face down on a flat soft working surface to ensure that the face is
not scratched or damaged. (Figure 1)
Installing the Side Panels: Insert left side panel (B1) and right side panel (B2) into the
2.
grooves of the face frame (A) and align the cam lock connectors. (Figure 2) Lock the cam locks with a
screwdriver by turning the screw 180° clockwise. (Figure 3)
3.
Installing the Bottom Panel: Gently spread the side panels and insert the bottom panel (C)
into the grooves of side panels (B1,B2) until it is fully seated into the groove of the face frame (A).
4.
Installing the Rear Side Panels (Figure 5): Insert rear left side panel (E1) and right side panel (E2)
into the grooves of the side panels (B1,B2) aligning side panels & bottom panel with rear side panels.
Lock each cam lock connector with a screwdriver by turning the screw. (Figure 3)
A
Figure 1
B2
B1
A
Figure 2
C
B1
A
Figure 4
E2
C
E1
A
B1
Figure 5
Page 3
Figure 3
B2
B2