Epson CX6600 - Stylus Photo Printer 빠른 매뉴얼 - 페이지 21

{카테고리_이름} Epson CX6600 - Stylus Photo Printer에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CX6600 - Stylus Photo Printer 48 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson CX6600 - Stylus Photo Printer에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (8 페이지), 정보 매뉴얼 (4 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 매뉴얼 (14 페이지), 업데이트 매뉴얼 (2 페이지), 설정 매뉴얼 (2 페이지), 업데이트 (1 페이지), 빠른 매뉴얼 (47 페이지), 운영 매뉴얼 (50 페이지)

To remove the card, pull it straight out of its slot.

Caution:

Do not remove the card or turn off the CX6600 while the memory card light is flashing,

or you may lose data on the card.

Note:

Your image files must meet these requirements:

File format

Media format

Image size

Using Your CX6600 as a Card Reader

You can use your CX6600 as an external card reader, letting you copy images from

a memory card to your computer, or vice versa. To use this feature with Windows

98SE or Me, make sure you installed your CX6600 software as described on the

Start Here sheet (this automatically installs the necessary USB storage drivers).

1. Make sure your CX6600 is turned on and connected to your computer.

2. Insert a memory card as described in the previous section. (If you'll be copying

images to the card, make sure the card's write-protect tab, if it has one, is set to

allow writing on the card.)

Note:

If this is your first time inserting a card, see "Using Epson CardMonitor" on

page 22 to set up Epson CardMonitor.

3. Once the card is inserted, it appears as a removable drive icon on your

computer. Copy images to or from the card, as needed.

Note:

If you copy images to the card, the number of images shown on the LCD screen

does not automatically change. You must remove and reinsert the card to make the

CX6600 recognize the new images.

JPEG or TIF format image files (supports Exif version 2.1/2.2)

DCF (Design rule for Camera File system) version 1.0

Vertical 120 to 4600 pixels, horizontal 120 to 4600 pixels

Using Your CX6600 as a Card Reader