Cisco 3515 MCU24 설치 및 업그레이드 매뉴얼 - 페이지 24

{카테고리_이름} Cisco 3515 MCU24에 대한 설치 및 업그레이드 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3515 MCU24 44 페이지. Cisco unified videoconferencing releases 5.6 and 5.7

페이지 인쇄

How to Perform the Video Processing Module Initial Configuration

The network interface card settings screen appears as follows:

Enter a number between 0 and 5, inclusive, representing the required option.

Step 6

We recommend using 5 (Auto) and the ethernet switch port to autonegotiate speed/duplex.

Step 7

Press any other key to quit without changing the network working mode.

Step 8

At the prompt, enter 4 to disable the DSP reset facility.

After options Q and 1-3, press any key to return to the video processing module Main menu. After option

Note

4, the video processing module Main menu displays automatically.

Caution

Only qualified technical personnel should modify the DSP reset function settings.

Saving Network Configuration Settings

Modified network configuration settings are automatically saved when you exit the video processing

module Main menu.

Procedure

Ensure you have completed your configuration.

Step 1

At the prompt, enter Q to exit the video processing module Main menu.

Step 2

The video processing module Main menu closes and your machine will automatically reboot.

Connecting the EMP to the LAN

Procedure

Connect the supplied LAN cable from your network switch to the 10/100BaseT Ethernet port on the front

Step 1

panel of the EMP unit. The 10/100BaseT port accepts an RJ-45 connector.

We recommend setting the network switch port to auto-negotiate speed/duplex.

Turn on the power to the EMP unit.

Step 2

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU 24 Releases 5.6 and 5.7

2-12

Choose : 1 - 10Mbps

Half Duplex

: 2 - 100Mbps Half Duplex

: 3 - 10Mbps

Full Duplex

: 4 - 100Mbps Full Duplex

: 5 - Auto

other - Quit

Chapter 2

Setting Up Your Cisco Unified Videoconferencing 3515 MCU

OL-17012-01