Cisco 500 Series 매뉴얼 - 페이지 4

{카테고리_이름} Cisco 500 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 40 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 Quide (13 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄
Cisco 500 Series 매뉴얼
Headsets
Cisco Headset 500 Series
Occasionally a tone is played over your Cisco Headset 561 or 562. Some of these tones alert you when you
perform an action, such as pressing a button. Other tones warn you that the headset requires attention, such
as when the battery needs recharging, or when you are too far from the base station.
Phone Firmware Release 12.5(1) or later and the defaultheadsetconfig.json file for the Cisco Headset 561 and
562 to function properly with Cisco Unified Communications Manager 12.5(1) or earlier.
Figure 5: Cisco Headset 561
Figure 6: Cisco Headset 562
Cisco Headset 500 Series Support
The Cisco IP Phone 7811 is the only phone in the Cisco IP Phone 7800 Series that does not support a headset.
The Cisco IP Phone 7821, 7841, and 7861 use an RJ-style connector to connect with a headset or base.
The Cisco IP Phone 8800 Series has both RJ-style connectors and USB ports to connect to headsets and bases
to a phone. But the type of connection depends upon your phone model. The following table describes headset
connection and phone model support on the Cisco IP Phone 8800 Series.
Headsets
4