Cisco 500 Series 매뉴얼 - 페이지 8

{카테고리_이름} Cisco 500 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 40 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 Quide (13 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄
Cisco 500 Series 매뉴얼
Cisco Headset 561 and 562 Buttons and LED
The following table describes the Cisco Headset 561 and 562 Headset buttons.
Table 4: Cisco Headset 561 and 562 Headset Buttons
Number
Name
1
Power and Call button
2
Mute button
3
Volume button
4
LED
Headsets
8
Description
Use to power the headset on and off.
Press and hold for 4 seconds to power on and off the headset.
Incoming and active call management depends upon if you have
one call or multiple calls.
One call:
• Press once to answer incoming calls.
• Press once to put an active call on hold. Press again to
retrieve a call from hold.
• Press twice to reject an incoming call.
• Press and hold to end an active call.
Multiple calls:
• Press once to put an active call on hold, and to answer a
second incoming call.
• Press once to put a current call on hold. Press again to resume
a call, or press and hold for 2 seconds to end the current call
and to resume a held call.
• Press and hold to end an active call, and to answer another
incoming call.
• Press twice to stay on a current call, and to reject a second
incoming call.
Toggle the microphone on and off. The Mute
lights when Mute on the headset is enabled.
Adjust the volume on your headset.
Shows the headset status:
• Blinking red—Incoming call.
• Steady red—Active call.
• Blinking white—Firmware upgrade is in progress.
Headsets
on the phone