Cisco 500 Series 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Cisco 500 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 25 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 Quide (13 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지)

페이지 인쇄

When the switch is using the factory default IP address, the System LED

flashes continuously. When the switch is using a DHCP server-assigned IP

address or an administrator has configured a static IP address, the System

LED is on solid (DHCP is enabled by default).

If you are managing the switch through a network connection and

OTE

the switch IP address is changed, either by a DHCP server or manually,

your access to the switch will be lost. You must enter the new IP address

the switch is using into your browser to use the web-based interface. If

you are managing the switch through a console port connection, the link

is retained.

To configure the switch through an IP network:

Power on the computer and the switch.

TEP

Set the IP configuration on your computer.

TEP

If the switch is using the factory default IP address of

192.168.1.254, you must chose an IP address for the computer

in the range of 192.168.1.1-192.168.1.253 that is not already in

use.

b. If the IP addresses is assigned by a DHCP server, make sure

the DHCP server is running and can be reached from the

switch and the computer. It might be necessary to disconnect

and reconnect the devices for them to discover their new IP

addresses from the DHCP server.

Details on how to change the IP address on your computer

OTE

depend upon the type of architecture and operating system you are

using. Use the computer Help and Support functionality to search for "IP

Addressing."

Open a Web browser window. If you are prompted to install an

TEP

Active-X plug-in when connecting to the device, follow the

prompts to accept the plug-in.

Enter the switch IP address in the address bar and press Enter. For

TEP

example, http://192.168.1.254.

The Switch Login Page displays.

Enter the default login information:

TEP

•

Username is cisco

•

Default password is cisco (passwords are case sensitive)

If this is the first time that you have logged on with the default

TEP

username and password, the

rules for constructing a new login and password are displayed on

the page. Enter a new administrator password and click Apply.

Change Password Page

500 Series Stackable Managed Switches

opens. The