Cisco 7750 운영 매뉴얼 - 페이지 9
{카테고리_이름} Cisco 7750에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7750 32 페이지. Hewlett-packard network router installation guide
페이지 인쇄
Chapter 5
Operating the Cisco ICS 7750
Accessing the SPE310 Windows Interface Through Terminal Services Client
Step 1
Step 2
Accessing the SPE310 Windows Interface Through Directly Connected
Peripherals
Note
78-14165-03
Accessing the Cisco IOS CLI on ASIs, MRPs, and the SSP Through Telnet,
•
page 5-11
Accessing Processor Cards Through the SAP, page 5-12
•
To access the SPE310 Windows interface through Terminal Services Client,
follow these steps:
On the PC that you use to administer the Cisco ICS 7750, choose Start >
Programs > Terminal Services Client > Client Connection Manager.
Use the Client Connection Manager to open a Terminal Services connection with
the target SPE310:
•
If you already have a Terminal Services Client connection defined for the
target SPE310, choose it, and choose File > Connect.
•
If you do not have a Terminal Services Client connection defined for the
target SPE310, choose File > New Connection. Follow the instructions in
the wizard. Then choose File > Connect.
The Terminal Services Client window opens. You can use Terminal Services
Client to access standard Windows utilities on the SPE310, such as Windows
Explorer and the Control Panel.
You can connect a monitor, keyboard, and mouse directly to the SPE310 to access
the Windows user interface, as follows.
For a summary of the issues related to the connection of peripherals to SPE310s,
as well as best practices for using peripherals with SPE310s, see the
Peripherals with SPE310s" section on page
5-19.
Cisco ICS 7750 Installation and Configuration Guide
Accessing the System
"Using
5-9