Epson EcoTank L810 여기에서 시작 - 페이지 3

{카테고리_이름} Epson EcoTank L810에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EcoTank L810 4 페이지.

L810/L850

Start Here

Unpack

Note:

The included ink bottles must be used for product setup and are not for resale.

Fill ink tanks

Note:

This product requires careful handling of ink. Wear plastic gloves and place a

sheet of paper under the ink tank unit when you fill or refill the ink tanks, as ink may

splatter. If ink spills, wipe it off immediately to avoid permanent stains. If ink gets on

your clothes or belongings, it may not come off.

Select your language, then press OK.

Load paper

Caution:

bottles are vacuum packed to maintain reliability. Never place the product on its side

after the ink tanks are filled.

Warning:

Replace bottle cap tightly, or ink may leak.

When a message appears

Confirm that the tanks are filled with ink,

on the LCD screen, press

then press

OK for 3 seconds.

charging takes approximately 20 minutes.

Read these instructions before using your product.

Note: The instructions show the L850, but the instructions

are the same for the L810 unless otherwise noted.

Do not open the ink bottles until you are ready to fill the ink tanks. The ink

Keep ink bottles out of the reach of children and do not drink the ink.

Make sure to use the ink bottles

that came with your product

and use all of the ink.

Fill each tank with the correct

ink color.

to start charging the ink. Ink

English

Make sure that the tray lever is in

the up position.

See the online User's Guide for

instructions on how to print on

CDs/DVDs.