Epson EcoTank L8160 Series 사용자 설명서

{카테고리_이름} Epson EcoTank L8160 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EcoTank L8160 Series 4 페이지.

페이지 인쇄

L8160/L8180

Start Here

IMPORTANT: Before using this product, make sure you read

these instructions and the safety instructions in the online User's

Guide.

The illustrations show the L8160, but the steps are the same for

the L8180, unless otherwise specified.

Note:

Not all products are available in all regions.

Unpack

Note:

• Do not open the ink bottles until you are ready to fill the ink tanks.

The ink bottles are vacuum packed to maintain reliability.

• The CD/DVD tray is on the bottom of paper cassette 2.

Remove all protective materials from the product.

Lift up the scanner unit and remove all protective

materials from inside the product.

Caution:

Do not touch the areas shown inside the product. The

printer ships with the transportation lock in the printing position.

Do not move it from the printing position.

L8180

Connect the power cord to the back of the product and to

an electrical outlet.

Caution:

Do not connect to your computer yet.

You can set up your product to print and scan wirelessly

from your mobile device or computer using the Epson

Smart Panel

app. To use the app, see "Setup from a

mobile device" on the back of this sheet. If you do not want

to use the app for setup, go to the next section.

Fill ink tanks

Warning:

Keep the ink bottles out of the reach of children and do not

drink the ink.

Caution:

This product requires careful handling of ink. If ink spills,

wipe it off immediately with a damp towel to avoid permanent stains.

If ink gets on your clothes or belongings, it may not come off.

Note:

• Epson cannot guarantee the quality or reliability of third-party ink.

• Use the ink bottles included with the printer to set up the product.

Part of the ink will be used to charge the print head. These bottles

will print fewer pages compared with replacement ink bottles.

• Epson strongly recommends the use of genuine ink to ensure

optimal print quality and performance.

Press the

power button to turn on the product.

Note:

If an error message appears, turn off the product and

check that no protective material has been left inside the product

and that the transportation lock is in the printing position.

Select your language on the LCD screen.

Note:

You can change this setting later using the product's

control panel. For more information, see the online User's Guide.

Open the ink tank cover, then open the cap for the

black (BK) ink tank.

Note:

Refer to the label above the ink tank to identify the color of

each tank.