Epson EMP 810 사용자 설명서 - 페이지 4
{카테고리_이름} Epson EMP 810에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EMP 810 28 페이지. Esc/vp21 command user's guide for business projectors
Epson EMP 810에 대해서도 마찬가지입니다: 네트워크 설치 매뉴얼 (37 페이지), 빠른 참조 매뉴얼 (17 페이지), 사용자 설명서 (24 페이지), 사양 (1 페이지)
페이지 인쇄
2.ESC/VP21 Command Formats
2.1.Set command format
A set command consists of a command and a parameter. Projector returns a colon after executing the command.
There are two types of parameters. One is fixed such as ON, OFF, or 21.Other is a step parameter such as INC, DEC or INIT.
INC increments the parameter by one.
DEC decrements the parameter by one.
INIT initializes the parameter.
Set command example 1
Colon from projector
Set command example 2
Colon from projector
2.2.Get command format
A get command consists of a command and ?. Projector returns a response parameter after executing the command.
Get command example
Response parameter example
2.3.Null command
The null command is a command code of the return key code (Hex 0D). Projector returns a colon. The null command can be used to confirm
that the projector is in operation.
2.4.Illegal commands
Projector returns "ERR" and a return key code (Hex 0D) and a colon when it receives invalid commands.
ESC/VP21 Command User's Guide for Business Projectors
: SOURCE 21
Command
: VOL INC
Command
: SOURCE?
Colon from projector
SOURCE = 21
:
Colon from projector
Command
ERR
:
Space
Parameter
Space
Parameter
Command
?
Return
=
Parameter
4 of 28
Return
Return