Epson ET-3700 빠른 매뉴얼 - 페이지 4

{카테고리_이름} Epson ET-3700에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson ET-3700 17 페이지.
Epson ET-3700에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 여기에서 시작 (4 페이지)

Checking Ink Levels

You can visually check the ink levels in the product's ink

tanks. Make sure the ink levels are above the lower ink refill

lines on the ink tanks. If ink levels fall below these lines, see

the online User's Guide for refilling instructions.

Note: You may also see a message displayed on your

computer screen when an ink tank is low or needs to be

refilled.

Your product has a low ink alert system. The accuracy of

this system depends on the user refilling the ink tanks

correctly. The product cannot directly measure the ink levels in the tanks, instead it

estimates the amount of ink remaining by internally monitoring ink usage. The low ink

alert system may generate inaccurate messages if the ink tanks are not refilled

according to the instructions in the online User's Guide.

Caution: Perform regular visual inspections of the ink tanks to ensure ink levels do not

fall below the lower line. Prolonged use of the product when the ink level is below the

lower line on the tank could damage the product.

If you need to transport or ship your product, see the online User's Guide for important

handling instructions.

Note: Make sure the ink tank caps are closed securely. Avoid tilting the product, placing it

vertically, or turning it upside down; otherwise, ink may leak. Do not put opened ink

bottles in the box with the printer.

If you have a network problem with your product, check the messages on the LCD screen

to diagnose the cause of most problems.

You can also check the basic troubleshooting suggestions below. For more in-depth

troubleshooting, see your online User's Guide or FAQs at

(U.S.) or

www.epson.ca/support

■

Try connecting to the wireless router or access point with your computer or another

device to confirm that it is working correctly.

■

The product can only connect to networks that support 2.4 GHz connections. If your

router offers both 2.4 GHz and 5 GHz connections, make sure 2.4 GHz is enabled.

■

Try restarting the router (turn it off and then on), then try to connect to it again.

Checking Ink Levels

(Canada).