Digitax F1 plus 사용자 설명서 - 페이지 2

{카테고리_이름} Digitax F1 plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digitax F1 plus 2 페이지. Taximeter
Digitax F1 plus에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

페이지 인쇄
Digitax F1 plus 사용자 설명서
The taximeter has, in its front side, 5 keys (or buttons)
called: OP, K1, K2, K3, K4.
The taximeter has three working modes called:
FOR HIRE
STOPPED
HIRED
The taximeter's
working modes are selectable by
pressing the OP button in the following sequence:
For Hire
Hired
Stopped
In any of the above taximeter's working mode (FOR
HIRE, HIRED, STOPPED), the other four buttons K1, K2,
K3, K4 will exploit a different function, as below de-
scribed.
A) Taxi in "For Hire"
When the Taxi is parked or it moves without any pas-
senger on board, the taxi driver selects the For Hire
position by OP. The clock is displayed and the keys will
have the following functions:
For Hire
Hired
Stopped
For Hire
Chrono Start
Chrono Stop
For Hire
Go back from Chrono to Clock
For Hire
Shows calendar Day and Month
For Hire
Shows Year
B) Taxi in "Hired"
Once the taxi starts the trip, the taxi driver selects the Hired
position by OP. The "Taxi" roof sign will turn off and the taxi-
meter starts the fare calculation by distance or time.
Hired
Stopped
For Hire
Hired
Selects Rate Nr (if inabled)
Hired
Insert Extra Nr 1 (If enabled)
Hired
Insert Extra Nr 2 (If enabled)
Hired
Reset Extras
C) Taxi in "Stopped"
At the end of the trip, the taxi driver has to select the
Stopped position by OP.
The waiting time counting is thus blocked.
Stopped
For Hire
Stopped
Stopped
Insert Special Extras
Stopped
Insert Extra Nr 3 (If enabled)
Stopped
Insert Extra Nr 4 (If enabled)
Stopped
Reset Extras
STATISTICAL MEMORY:
READ / PRINT / ERASE
The taximeter has, inside, 2 blocks of memory called:
BLOCK 1 --- BLOCK 2
Each one is divided in 45 locations. Each one is enabled to
record and keep the taximeter's activity.
Block 1 is the Partial Block since the activity information con-
tained in its 45 locations can be read, printed and erased
whenever desired (See specifi c procedure).
This "Partial Function" is very useful and may be utilized for
working shift data's control and analisys.
Block 2 is the Total or Cumulative Block since the activity
information contained in its 45 locations can only be read
and printed.
HOW TO READ THE INFORMATION
CONTAINED IN BLOCK 1 and 2
FIG. 1
STATIS
FOR HIRE
ST OPPED
HIRED
Night Day
OP
Mod.
FARE £
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
TAR. EXTRAS
£
Serial Nr.
K1
K2
K2
2
2
2
K
K
K 3
K
K3
K3
K3
K
K3
K 3
K 3
K
K3
K3
K3
K
K
K3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
K4
960000100
Push these keys at the same time
se
e s
Memory Data
36
FOR HIRE
ST OPPED HIRED
Night Day
OP
Mod.
FIG. 2
FARE £
1 1
1 1
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
EXTRAS
£
Serial Nr.
K1
K
K
K
K
K
K
K 1
K
K
K
K
K
K
K
K2
K
K 2
K
K3
K4
TAR.
960000100
1
1
Memory
1
1
Decrease
-
+
Increase
Memory
Location
Memory Location Number
Block
Number
FIG. 3
FOR HIRE
36
ST OPPED
HIRED
Night Da y
OP
Mod.
FARE £
2
28
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
EXTRAS
£
Serial Nr.
K1
K2
K
K3
K3
K4
TAR.
960000100
Changes Memory Block
1)Select the For Hire mode by pressing OP button;
2)Press K1 + K2 buttons at the same time to enter "Statistical
Reading"; (Fig.1)
3)The secondary display will now show: (Fig.2) at its left-side:
1 - indicating the Memory Block Nr. being read pressing K3 button
now, to go to Block 2; (Fig.3) pressing K3 button again, to go back to
Block 1. at its right-side: a number between 1 and 45, indicating the
Location Number. (Fig.2)
4)The main display will now show a Nr. which is the information
contained in the correspondent memory location being read and
now indicated at right-side of secondary display;(please see
locations' list ) (Fig. 2 /3)
5)Press K1 or K2 buttons if You wish to decrease or increase
respectively memory location's Nr. (memory location Nr. is indicated
on right side of secondary display);(Fig. 2)
6)Press OP button to go back to For Hire mode and to END the
Reading Procedure
STATISTICAL MEMORY: PRINT-OUT
1)Select the For Hire mode by pressing OP button;
2)Press K1+K2 buttons at the same time to enter
"Statistical Reading"; (Fig. 4)
3)Press K2 buttons till You reach memory location Nr.5
(memory locations Nrs. are shown at right side on secondary
display); (Fig. 5)
4)When You have reached memory location Nr.5, press K4
button to print out all information contained in memory loca-
tions of both memory blocks. (Fig. 6)
5)Press OP button to go back to For Hire mode and to
END procedure.
FOR HIRE
ST OPPED HIRED
36
Night Day
OP
FIG.4
Mod.
FARE £
1
1
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
EXTRAS
£
Serial Nr.
K
K 1
K
K 1
K
K
K
K
K1
K1
K
K
K
K 1
K1
K1
K
K 1
K1
K
K
K1
K
1
1
1
1
K2
K2
K2
K2
K2
K2
K
K 2
K2
K2
K
K
K2
K
K2
2
2
2
2
2
2
2
2
K3
K4
TAR.
960000100
Push these keys at the same time
420
FOR HIRE
ST OPPED
HIRE D
Night Da y
OP
FIG.5
Mod.
FARE £
1
5
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
EXTRAS
£
Serial Nr.
K1
K2
K2
K3
K4
TAR.
960000100
Push to reach loc.5
Push here to go back to Stopped
FIG.6
FOR HIRE
420
ST OPPED
HIRE D
Night Da y
O
OP
Mod.
FARE £
1
5
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
K2
K3
EXTRAS
£
Serial Nr.
K1
K4
K4
TAR.
960000100
Push to Print Out
HOW TO ERASE INFORMATIONS CONTAINED
IN MEMORY LOCATIONS OF BLOCK 1
1)Select the FOR HIRE mode by pressing OP button;
2)Press K1+K2 buttons at the same time to enter "Statistical
Reading";(Fig. 7)
3)Press K2 buttons till You reach memory location Nr.19; (memory
locations Nrs. are shown at right on secondary display);(Fig. 8)
4)When You have reached memory location Nr.19, press K4 button
to erase all information contained in memory locations of BLOCK
1; (when pressing K4, if the printer is ON all the information
would be printed before being erased);(Fig. 9)
5)Press OP button to go back to FOR HIRE mode and to END
procedure.
FOR HIRE
36
ST OPPED HIRED
Night Da y
OP
Mod.
FIG.7
FARE £
1
1
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
EXTRAS
£
Serial Nr.
K1
K1
K2
K2
K2
2
2
2
2
2
2
2
2
2
2
2
2
K3
K3
K3
K3
K3
K3
3
3
K4
TAR.
960000100
Push these keys at
the
same time
FOR HIRE
2012
ST OPPE D HIRE D
Night Da y
OP
Mod.
FIG.8
FARE £
1
19
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
EXTRAS
£
Serial Nr.
K
K
K1
K
K1
K
K1
K
K1
K
K1
K1
1
1
1
1
1
1
1
1
1
K2
K
K3
K4
TAR.
960000100
Push to reach loc.19
9
Push here to go back to Stopped
2012
FOR HIRE
ST OPPE D HIRE D
Night Da y
FIG.9
OP
Mod.
FARE £
1
19
k= 200 to 100000 i/km
By Digitax S.r.l
62017 Portorecanati
(MC) ITALY
K2
K3
K 3
K
K
K
K
K
K
K 3
K3
K
K
K
K
K3
K
K
K
K
K
K
K 3
K
K
K
K3
K 3
3
K4
K4
TAR.
EXTRAS
£
Serial Nr.
K1
960000100
Push to Erase Block 1
STATISTICAL MEMORY READING
Memory Location List
ML Block 1
Block 2
1)
Trips total number
idem
2)
Taximeter units total number
idem
3)
Total Kilometers
idem
4)
Total Kilometers in For Hire
idem
5)
Total Kilometers in Hired
idem
6)
Km in for For Hire with passenger on board idem
7)
Km in Over speed
idem
8)
Collected Total (Fare+Extras+Tax)
idem
9)
Collected by Credit Card Total
idem/100
10)
Fare Total Amount (excluded Extras+Tax)
idem/100
11)
Extras Total Amount
idem/100
12)
Tax Total Amount
idem/100
13)
Run time in Stopped
idem
14)
Run time in Hired and Stopped
idem
15)
Waiting time in Hired
idem
16)
Meter on total time
idem
17)
Total Tariff 1 collection
idem
18)
Total Tariff 2 collection
idem
19)
Total Tariff 3 collection
idem
20)
Total Tariff 4 collection
idem
21)
Total Tariff 5 collection
idem
22)
Total Tariff 6 collection
idem
23)
Total collections from 7th to 64th
idem
24)
Total tariff 1 units
idem
25)
Total tariff 2 units
idem
26)
Total tariff 3 units
idem
27)
Total tariff 4 units
idem
28)
Total tariff 5 units
idem
29)
Total tariff 6 units
idem
30)
Total units from 7th to 64th tariff
idem
31)
Total Kilometers in tariff 1
idem
32)
Total Kilometers in tariff 2
idem
33)
Total Kilometers in tariff 3
idem
34)
Total Kilometers in tariff 4
idem
35)
Total Kilometers in tariff 5
idem
36)
Total Kilometers in tariff 6
idem
37)
Total Km from 7th to 64th
idem
38)
Not used
39)
Not used
40)
Not used
41)
Not used
42)
Not used
43)
Not used
44)
Not used
45)
Not used